Monday, 6 February 2017

Otago Central Railway [8]: Waipiata-Ranfurly

Whilst progress has slowed a lot lately I am still working on the maps as time allows. I have discovered that aerial photography at 0.4 metres resolution is available for the entire line (there is higher resolution coverage available for a few areas close to Dunedin as well). This is very material to what I am doing because Google's licensing forbids copying from their imagery, meaning I have to change all the maps to use only Linz aerial photography as their source. It is likely I will have to download aerial photography for every map in NZ to ensure that all content has been sourced from the Linz coverage rather than any other source that may have licensing restrictions applying to it.


Waipiata station (approximate layout). This overlay uses 0.75 m aerial photography that I downloaded before I became aware of the 0.4 metre Central Otago coverage. I will download this higher resolution photography over the next few days and load it on Qgis so I can make sure I don't need to use Google Earth at all.


Ballast pit (red x's) between the 75 and 76 mile pegs, just south of Ranfurly. The map below illustrates this location.



The locomotive depot area immediately south of Ranfurly. The map above shows the location of the turntable and engine shed, while the image below is from Whites Aviation and shows the development of these facilities in 1951. Prior to that time Ranfurly had an engine depot north of the station.


Wednesday, 1 February 2017

Otago Central Railway [7]: Kokonga

So today we are having a look at Kokonga, Here's a few maps.

In the last two posts I showed where the station building was relocated to after NZR sold it, and what it looks like today. I don't know when that happened, but probably sometime after 1985 when the station was fully closed.

Here is the overall layout of the station.

The ballast siding went right towards the river, crossing over the main highway, and the embankment downgrade to the crossing remains clear today. The area directly behind the station building was set out as a township, and you can still see the section boundaries on that map, but there is nothing left of that settlement today. There is an old church and some possibly period houses alongside the highway to the north of the ballast siding, and a couple of other houses nearer the station, but of course the relevance of them to the railway isn't clear to me.

Here we have a closer look at some of the detail of the main station buildings.

At the north end of the station yard were the ballast siding, engine shed siding, the water tank and a house. Dangerfield and Emerson describe the water tank as being gravity fed, and while they don't elaborate on how this worked exactly, the railway line is on a ledge between some hills and the river, so it's quite possible a water supply was tapped on a hillside to the west of the station to supply the tank. The engine shed probably dates from the construction days and would have been removed when the railhead moved further westerly.

Friday, 27 January 2017

Otago Central Railway [6A]: Relocated station buiildings

Oops, I had better put in a couple of pictures of the railway stations in their new locations.


The second photo was found here: http://advrider.com/index.php?threads/mad-bastards-on-bulldozers-south-is-nz.857611/page-2
The title refers to the means used to get this building up a hill, which you can read about in the web site, as well as the general area.